How to Choose a Concrete Contractor

How to Choose a Concrete Contractor: What They Do and How to Compare Quotes

To choose a concrete contractor, start by checking their NSW licence and insurance. Then look at jobs they’ve done that are similar to yours. Get two or three written quotes and compare them line by line: slab thickness, reinforcement, concrete contractors near me finish, excavation and clean-up. The lowest total isn’t always the cheapest job. Often it’s just the one leaving the most out.

Coalesce Concreting pour driveways, slabs, paths and council works across Sydney. Here’s how we’d suggest sizing up any contractor, including us.

What Does a Concrete Contractor Do?

A good concrete contractor handles the whole job, not just the pour. On a typical driveway or slab, that includes:

  • Site assessment. Checking levels, drainage, access and soil.
  • Excavation and prep. Digging out, removing old concrete and laying and compacting a road base.
  • Setting the edges that hold the concrete’s shape and height.
  • Steel mesh or bars, chaired to sit at the right depth.
  • Pouring and placing. Ordering the right mix and pumping or barrowing it in.
  • Broom, exposed aggregate, stamped, stencilled, coloured or polished.
  • Control joints and curing. Cutting joints to manage cracking and letting the slab cure properly.
  • Council works. Crossovers, kerbs and footpaths built to council specs.

If a contractor’s quote skips half of this list, ask who’s doing the rest.

How to Choose a Concrete Contractor in Sydney

Licence and insurance

In NSW, residential building work needs a licensed contractor. You can check any licence on the NSW Government’s online licence check in a couple of minutes. Ask for public liability insurance too. For residential jobs over $20,000, the contractor must also provide a Home Building Compensation insurance certificate.

Work that looks like yours

A crew that’s great at house slabs isn’t automatically right for a decorative driveway. Ask for photos of similar jobs, and if you can, an address you can drive past.

Who actually turns up

Some companies quote the job and then hand it to subcontractors. That’s not always bad, but you should know who’ll be on site and who’s in charge.

Council experience

Driveway crossovers and footpaths usually need council approval and an inspection. A contractor who does council work regularly will know the local specs and paperwork.

Concrete Contractor Quote Checklist

Use this when the quotes come in. If something’s missing, ask.

ItemWhat to look for
ScopeExact area in m² and what’s included
Slab thicknesse.g. 100 mm for a standard driveway, more for heavier vehicles
Concrete strengthThe MPa rating of the mix
ReinforcementMesh type, or bar size and spacing
Excavation and removalIs digging out and taking away old concrete included?
Base preparationRoad base depth and compaction
FinishBroom, exposed aggregate, stamped, coloured and so on
Control joints and sealingIncluded or extra?
Pump hireNeeded when the truck can’t reach the pour site
Council fees and inspectionsWho applies and who pays
TimelineStart date and how long the job runs
Payment termsDeposit amount and progress payments
WarrantyWhat’s covered and for how long

Why Concrete Quotes Can Be So Different

Two quotes for the same driveway can be thousands apart. The usual reasons:

  • One includes removing the old slab and the other doesn’t
  • Different thickness or reinforcement
  • A pump is needed because of tight access
  • Decorative finishes cost more than a plain broom finish
  • Sloping blocks need more formwork and prep
  • One quote leaves out council fees or sealing

Line the quotes up side by side using the checklist. Gaps show up quickly.

Contracts and Deposits in NSW

A few NSW rules are worth knowing before you sign:

  • Residential work over $5,000 (including GST) needs a written contract.
  • A contractor can’t ask for a deposit of more than 10%.
  • Contracts over $20,000 need a Home Building Compensation insurance certificate before any deposit is taken.

If a contractor pushes for cash upfront with no paperwork, walk away.

FAQs

How many quotes should I get for a concrete job?

Two or three is plenty. More than that and comparing them gets hard. Make sure they’re all quoting the same scope.

Is the cheapest concrete quote a bad sign?

Not always, but check what’s missing. Thinner slabs, lighter mesh or no excavation can make a quote look cheap.

Do I need council approval for a new driveway in Sydney?

Usually for the crossover, which is the section between your boundary and the road. Rules vary between councils. We handle council crossovers regularly and can help with the process.

How long before I can drive on new concrete?

Foot traffic is generally fine after a day or two. Wait about a week before driving on it, longer for heavy vehicles. The slab keeps curing for weeks.

Can one contractor do both my driveway and the council crossover?

Yes. We do both, which keeps levels consistent from your garage to the kerb.